Response of human periodontal ligament to orthodontic force using superb microvascular imaging.

INTRODUCTION: Remodeling of the periodontal ligament (PDL) during orthodontic tooth movement is closely related to the vascularity of the PDL, which has not been thoroughly investigated in humans. This study aimed to measure the width and vascular parameters of human PDL using superb microvascular imaging for the first time. METHODS: Patients aged 18-25 years were selected for participation. The intervention was randomly allocated from the maxillary canines to the first molars on both sides using 50 g or 150 g of force. The width and vascular parameters of the PDL were measured using superb microvascular imaging at different time intervals (baseline, 30 minutes, and 1, 3, 7, and 14 days). RESULTS: Before the intervention, the width of the PDL ranged from 0.14 to 0.25 mm, and the vascular index ranged from 9.40% to 13.54%. After applying orthodontic forces, the cervical and middle PDL widths increased. The vascular index decreased slightly in 30 minutes, decreased to a minimum value after 1 day, increased to the maximum in 3-7 days, and returned to baseline values in 14 days. The values of other vascular parameters showed similar trends. CONCLUSIONS: The width and vascular parameters of the PDL changed slightly after force application, underwent changes in the period of reconstruction for 3-7 days, and eventually returned to baseline in 14 days.

Accuracy of dental arch form in customized fixed labial orthodontic appliances.

INTRODUCTION: This study evaluated arch form accuracy with or without premolar extraction in customized fixed labial orthodontic appliance treatment. METHODS: Setup and posttreatment digital models of 27 samples (15 extractions and 12 nonextractions) were selected and superimposed by best-fit surface-based registration in both the maxilla and the mandible. The facial axis points were identified and converted into Cartesian coordinates. A sixth-order polynomial equation was used to fit dental arches. Arch discrepancies (the mean distance between 2 arch forms) and similarities were compared between extraction and nonextraction groups, maxilla and mandible, and anterior and posterior arches. RESULTS: The arch discrepancy between extraction and nonextraction groups showed no statistically significant difference, but a statistically significant difference in arch similarity was found in the mandible. There were statistically significant differences between anterior and posterior arch discrepancies in the extraction (mandible) and the nonextraction (maxilla and mandible) groups. However, no statistically significant correlation was shown between anterior and posterior arch discrepancies. The arch similarities were 96.18% and 97.38% in the maxilla and 96.01% and 97.49% in the mandible between extraction and nonextraction groups. Arch form discrepancies and similarities showed a moderate correlation but no statistically significant differences between the maxilla and the mandible. CONCLUSIONS: In customized fixed labial orthodontic appliance treatment, arch form setup can be accurately achieved with and without premolar extraction. Anterior arch form acquires fewer discrepancies than the posterior arch, and overcorrection should be added to the end of the customized archwire to reduce posterior arch discrepancies. The discrepancy of the maxillary and mandibular arches is interrelated, and adjustments should be made on both maxillary and mandibular archwires to correct single-jaw transverse malposition.

Effect of archwire plane and archwire size on anterior teeth movement in sliding mechanics in customized labial orthodontics: a 3D finite element study.

BACKGROUND: The aim of this study was to evaluate anterior teeth movement with different archwire planes and archwire sizes during space closure with and without miniscrew in sliding mechanics. METHODS: A 3D finite element method was applied to simulate anterior teeth retraction with and without miniscrew and power arm. Initial displacements and pressure stresses of periodontal tissue in anterior teeth were calculated after the teeth were applied with retraction forces with different archwire planes and archwire sizes. RESULTS: High archwire plane showed better torque control of anterior teeth in both sliding mechanics. With intramaxillary retraction, anterior teeth showed lingual tipping and extrusion movement, whereas larger-size archwires did not reduce it. In miniscrew sliding mechanics, anterior teeth showed labial tipping and intrusion movement. Compared with intramaxillary retraction, the retraction force produced less pressure stress on periodontal tissue in miniscrew sliding mechanics with long power arm. CONCLUSIONS: Higher archwire plane is conducive to anterior teeth torque control. In order to achieve the bodily movement of the anterior teeth during space closure, it is more important to choose the appropriate method (miniscrew sliding mechanics with long power arm), instead of increasing the size of the archwire.

[In vitro study of a new lasso device for intra-canal broken instrument removal].

PURPOSE: To collect facial stereo images of different lip protrusion by using three dimensional surface imaging device, and investigate facial aesthetic evaluation and differences between orthodontists, general dentists and laypeople. METHODS: In this study, one college student was recruited to take a three-dimensional image of the natural head and face. The software was simulated with a gradient of 2 mm to make the soft tissue lips move back and forth along the sagittal axis from the VSL line.The movement limit was 6 mm in front of and behind the VSL line. The observers included orthodontists, general dentists and laypeople. The data were analyzed with SAS 9.4 software package,visual analog scoring (VAS) was used for evaluation, and fixed-effect model was used for statistical analysis. RESULTS: The results showed that when the lip was on the VSL line, it got the highest scores amount all three groups and had no significant difference.When the lip became protrusive or retractive, it had negative impact on facial esthetics. There were significant differences in the scores of three groups in every 2mm of lip protrusion and lip retraction(P＜0.05). VAS 5 points or less were used as the unacceptable facial aesthetic score. The results showed that lip protrusion was 4 mm before the VSL line in the orthodontist group and less than 5 in the laypeople group . When the lip protruded 6mm before the VSL line and retracted 4 mm behind the VSL line, the scores of the three groups were lower than 5 points. The results also showed that male evaluation of lip protrusion 2 mm before the VSL line had a lower score than female; On the other hand, female evaluation of lip retraction behind the VSL line above 4mm had a lower score than male. CONCLUSIONS: Lip position has significant effect on facial aesthetics. Different observers had significant differences in the evaluation of lip position on facial aesthetics. It is suggested that orthodontists need more communication with patients in determining the target position of orthodontic treatment to improve treatment satisfaction.

Accuracy of different tooth surfaces on 3D printed dental models: orthodontic perspective.

BACKGROUND: Few studies have been reported regarding the accuracy of 3D-printed models for orthodontic applications. The aim of this study was to assess the accuracy of 3D-printed dental models of different tooth surfaces. METHODS: Thirty volunteers were recruited from the hospital, and then their dental models were produced by means of oral scanning and a stereolithography-based 3D printer. Each printed model was digitally scanned and compared with the oral-scanned STL file via superimposition analysis. A color map was used to assess the accuracy of different surfaces (occlusal, buccal, lingual) of anterior and posterior teeth. The Tukey test was used to evaluate the differences between the superimposition. RESULTS: Statistically significant differences were found in the average deviations of different tooth surfaces (P < 0.05). The mean average absolute deviations of the occlusal surfaces of posterior teeth were greater than those of other surfaces. Percentages of points beyond the upper and lower limits of different tooth surfaces displayed the same results (P < 0.05). CONCLUSIONS: Occlusal surfaces, especially pits and fissures of posterior teeth on 3D printed maxillary dental models, showed greater distortions than those of other teeth and regions.

Assessing the Influence of Chin Asymmetry on Perceived Facial Esthetics With 3-Dimensional Images.

PURPOSE: We used 3-dimensinonal (3D) images to assess the influence of chin asymmetry on perceived facial esthetics, investigate the cognitive boundaries of chin asymmetry among orthodontists, general dentists, and laypersons, and provide quantitative reference for clinical treatment. MATERIALS AND METHODS: A 3D facial image was obtained using the 3dMD imaging system (3dMD, Atlanta, GA). The chin was altered in 2-mm increments from 0 to 12 mm and to the left and right using the software program. These images were rated by 66 orthodontists, 89 general dentists, and 66 laypersons as 1) chin symmetry; 2) slight chin asymmetry but acceptable; and 3) serious asymmetry and treatment needed. Multivariate mixed linear regression and multivariate mixed logistic regression analyses were used for statistical data analysis. Descriptive and bivariate statistics were calculated, and statistical significance was considered present at P = .05. RESULTS: The observers progressively increased the grade ratings and the desire for surgery for greater asymmetries (P < .001). Orthodontists and general dentists could perceive a chin deviation of 4 mm to the right and 2 mm to the left, with 8-mm deviation considered to require treatment. Laypersons had a clear perception of a 4-mm chin deviation, with 8 mm to the right and 10 mm to the left considered to require treatment. The right chin deflection was more easily perceived than was the left (P < .05). CONCLUSIONS: Chin asymmetry has a great influence on facial esthetics. We found a statistically significant difference between clinicians (orthodontists and general dentists) and laypersons in the cognition of chin asymmetry and the recommendations for treatment.

A novel customized ceramic bracket for esthetic orthodontics: in vitro study.

BACKGROUND: This study aims to develop a novel process to establish a standardized manufacturing technique of customized esthetic ceramic bracket system (CCB) which could be endowed with individual color and shape to satisfy patients' individual demands. Material characteristics and mechanical parameters of CCB were evaluated. SUBJECTS AND METHODS: CCB virtual models were designed individually according to patient's teeth morphology and clinical demands. 3D printing technology, lost-wax technology, and selected glass-ceramic ingots were employed to fabricate CCB. Scanning electron microscopy (SEM) analyses were performed to characterize the surface morphology of CCB and commercially available brackets (Clarity Advanced; Crystalline VII; Inspire ICE; Damon Q). Static and kinetic frictional resistance (FR), shear bond strength (SBS) and adhesive remnant index (ARI) scores were recorded. One-way analyses of variance (ANOVA) and post-hoc Tukey's HSD multiple tests were used for statistical analyses. RESULTS: Multi-color and multi-transparency raw materials facilitated CCB with a wide range of color options and controllable optical properties to satisfy different esthetic demands of individual orthodontic patients. CCB presented same level of FR as commercially available ceramic brackets did. No significant differences (P ≥ 0.05) of SBS were observed among CCB-ES (treated silane), Clarity Advanced and Crystalline VII groups, and CCB-E (no silane) attained the highest ARI mean score 3. In the preliminary clinical trial, CCB presented excellent color-matching and shape-matching appearances similar to natural teeth, which made it highly invisible from social intercourse distance. CONCLUSIONS: CCB were demonstrated to be an applicable labial orthodontic bracket system with optimized esthetics and biomechanics. We envision that it would be an ideal alternative for patients who pursue esthetic orthodontic treatment but were not likely to take lingual appliances or clear aligners.

Accuracy of in vitro mandibular volumetric measurements from CBCT of different voxel sizes with different segmentation threshold settings.

BACKGROUND: To determine the accuracy of volumetric measurements of the mandible in vitro by cone-beam computed tomography (CBCT) and to analyze the influence of voxel sizes and segmentation threshold settings on it. METHODS: The samples were obtained from pig mandibles and scanned with 4 voxel sizes: .125 mm, .20 mm, .30 mm, and .40 mm. The minimum segmentation thresholds in Hounsfield units (HU) were set as 0, 100, 200, 300, and 400, respectively, for each voxel size for 3D reconstruction. Laser scanning as the reference, the volumes of each CBCT scanning, the mean iterative distances of superimposition and total positive and negative deviations were recorded and compared. RESULTS: The volumes of CBCT-scan deviated from those of laser-scan by + 7.67% to - 3.05% with different HU and voxel sizes. The deviation increased with the voxel size. There was a more suitable minimum HU threshold of segmentation (HU100 for .125 mm, 200 for .20 mm, 300 for .30 mm, and 400 for .40 mm) for each voxel size. CONCLUSIONS: Voxel sizes and Hounsfield unit thresholds influence the accuracy of volumetric measurements in CBCT scanning. The volume increase with the voxel size, and different voxel sizes correspond to different optimal Hounsfield unit thresholds.

Detection of alveolar bone defects with three different voxel sizes of cone-beam computed tomography: an in vitro study.

This study was conducted to assess the accuracy of cone-beam computed tomography (CBCT) of different voxel sizes in the detection of alveolar bone defects, and to select the optimal voxel size for clinical use. 46 in-vitro teeth were placed in bovine ribs in which alveolar bone defects were randomly simulated. In total, 32 alveolar bone defects and 14 teeth without periodontal defects were used. CBCT images were acquired with the use of three different voxel sizes: 0.125-mm, 0.2-mm and 0.4-mm. The scan data were 3D-reconstructed in Mimics software and evaluated by two observers with more than 5 years of experience in CBCT. Receiver operating characteristic (ROC) curves and diagnostic values were obtained. Pairwise comparison of ROC curves was made for evaluation of the diagnostic values of different voxel sizes. Kappa statistics assessed the observer reliability. Results were considered significant at P < 0.05. It showed no statistically significant difference between 0.125-mm group and 0.2-mm group, but 0.4-mm group had lower Az values that differed significantly from 0.125-mm and 0.2-mm groups (P < 0.05). Based on diagnostic value and radiation protection, 0.2-mm voxel size may be a good choice for the detection of bone defects with CBCT.

Precision of 3D-printed splints with different dental model offsets.

INTRODUCTION: The purpose of this study was to assess the precision of 3D-printed splints generated from different dental model offsets. METHODS: Ten maxillary models were offset by given distances (0.05 mm, 0.1 mm, and 0.2 mm). Digital splints were created by means of the boolean operation. The physical splints were fabricated by means of digital light-processing (DLP) rapid prototyping technologies. A layer of impression material, which could be weighed by means of an electronic analytical balance, was placed in the airspace between the splint and the teeth. We also calculated the shell-to-shell deviations by measuring the 3-dimensional (3D) euclidean distances between the surface points of the scanned splints and the original digital splint and evaluating the results with color-mapping methods. RESULTS: There was a statistically significant difference in the amounts of impression material remaining in the airspace between the 0.0-mm group and the 0.05-mm, 0.1-mm, and 0.2-mm groups (P < 0.05), between the 0.05-mm and the 0.1-mm and 0.2-mm groups (P < 0.05), and between the 0.0-mm group and the 0.05-mm, 0.1-mm, and 0.2-mm groups (P < 0.05). There was a statistically significant difference in shell-to-shell deviations between the 0.05-mm and the 0.1-mm and 0.2-mm groups (P < 0.05). CONCLUSIONS: 3D-printed splints generated from offset dental models (offset 0.05 mm, 0.1 mm, and 0.2 mm) can fit better on the teeth than splints from no-offset dental models. An offset of 0.1 mm is the best choice of parameter for generating the splint.

[Assessing the influence of chin prominence on perceived facial aesthetics among three groups of observers].

PURPOSE: To assess the influence of chin prominence on facial aesthetics with 3D images, to investigate the cognitive boundaries of chin prominence among orthodontists, general dentists and laypeople and compare the variance of their cognitive data, in order to provide quantitative reference for selection of clinical treatment. METHODS: A 3D facial image was obtained by 3dMD. The soft tissue pogonion point was altered in 2 mm increments from -10 to 10 mm with Geomagic Wrap 2015, in order to represent retrusion and protrusion of the chin. These images were rated by orthodontists, general dentists and laypeople with VAS scores. Multivariate mixed linear regression was used to analyze the influence of gender, age and chin prominence on VAS scores, and whether there were differences among different groups with SAS 9.4 software package. ANOVA was also applied for comparison of each prominence. RESULTS: This study was composed of 243 subjects, including 90 orthodontists, 101 general dentists and 52 laypeople. Chin prominence had significant effect on VAS scores. VAS scores decreased by 0.8910 for each unit increase in chin retrusion and decreased by 1.0958 for each unit increase in chin protrusion（P<0.01）. Desire for treatment started when chin retrusion exceeded 6 mm in orthodontist group and layperson group, 4 mm in general dentist group, and chin protrusion reached 6 mm in all groups（VAS scores <5）. There was no significant difference in the scores among orthodontists, general dentists and laypeople with the variance of chin prominence, and there was no significant difference in gender and age. CONCLUSIONS: Chin prominence had significant effect on facial aesthetics. Soft tissue pogonion point located on the zero meridian was considered as the most attractive. Treatment needs increased significantly when chin protrusion reached 6 mm or chin retrusion exceeded 6 mm. There was no significant difference in the assessment among orthodontists, general dentists and laypeople.

Comparison of survival time and comfort between 2 clear overlay retainers with different thicknesses: A pilot randomized controlled trial.

INTRODUCTION: The objective of this 2-arm parallel trial was to compare the survival times, failure rates, and comfort of 2 clear overlay retainers with different thicknesses (0.75 and 1.00 mm). METHODS: Eighty eligible participants who had undergone orthodontic treatment at West China Stomatology Hospital of Sichuan University were recruited and randomly assigned to either the 0.75-mm group or the 1.00-mm group. Eligibility criteria included patients with central incisors, canines, and first molars and no systemic or oral disease. The main outcomes were survival time and total failure rate; the secondary outcomes were rates of different types of failure (fracture, loss, nonfitting, and abrasion); tertiary outcomes included patients' comfort levels assessed with a visual analog scale and a health survey. Randomization was accomplished by tossing a coin, with the allocations concealed in sequentially numbered, opaque, sealed envelopes, and blinding implemented among practitioners, patients, and analysts. Patients were evaluated at 1, 3, 6, and 12 months of follow-up. RESULTS: A total of 80 patients were initially recruited and randomized (42 in the 0.75-mm group, 38 in the 1.00-mm group); 72 patients completed the study and were analyzed (37 in the 0.75-mm group, 35 in the 1.00-mm group); there were 8 dropouts. Baseline characteristics were similar between the groups. At the end of the 1-year follow-up, survival time did not differ significantly between the groups (46.5 days; 95% confidence interval [CI], -10.3 -103.2; P = 0.111). The hazard ratio was 0.77 (95% CI, 0.48-1.24; P = 0.281). With regard to total failure rate, no statistical difference (P = 0.118) existed between the 0.75-mm group (43.2%) and the 1.00-mm group (25.7%) (risk difference, 17.5%; 95% CI, -4.0%-39.1%). Among the different failure types, we found that fracture rates were significantly higher in the 0.75-mm group than in the 1.00-mm group (P = 0.028), whereas other failure types were similar between the groups (all, P >0.05). No clinically significant differences were found in comfort between the 2 groups. No harms were encountered. CONCLUSIONS: Although the 0.75-mm group had a higher fracture rate, our results indicated no evidence that survival and comfort of retainers differ between 1.00 mm and 0.75 mm. When determining the type of retainer to be used, other factors such as retention effectiveness also should be considered. REGISTRATION: This trial was registered at www.clinicaltrials.gov (NCT02618330). PROTOCOL: The protocol was not published before trial commencement.

Effect of static magnetic field on pain level and expression of P2X3 receptors in the trigeminal ganglion in mice following experimental tooth movement.

Recent research has demonstrated that static magnetic fields (SMF) can generate an analgesic effect in different conditions. The present study explored effects of SMF on pain levels and expressions of P2X3 receptors in trigeminal ganglion (TG) in mice after experimental tooth movement (tooth movement induced by springs between teeth). Experiments were performed in male mice (body mass: 25-30 g) and divided into SMF + force group, force group, and no force group. Exposure time was over 22 h per day. Mouse Grimace Scale was used for evaluating orofacial pain levels during experimental tooth movement at 4 h and 1, 3, 7, and 14 days. Meanwhile, expression levels of P2X3 receptors in the TG were evaluated by immunohistochemistry and western blotting at same time points. We finally found that during experimental tooth movement, pain levels of mice peaked at 3 days, and then decreased. While pain levels of mice were reduced in the SMF environment at 4 h, 1 and 3 days, there was a significant difference at 1 and 3 days. Meanwhile, under the action of SMF, expression levels of P2X3 receptors in TG were significantly lower at 4 h, 3 and 7 days. These results suggest that SMF can reduce pain levels in mice, and down-regulate P2X3 receptors in TG. Bioelectromagnetics. 38:22-30, 2017. © 2016 Wiley Periodicals, Inc.

The effect of capsaicin on expression patterns of CGRP in trigeminal ganglion and trigeminal nucleus caudalis following experimental tooth movement in rats

ABSTRACT Objectives The aim of this study was to explore the effect of capsaicin on expression patterns of calcitonin gene-related peptide (CGRP) in the trigeminal ganglion (TG) and trigeminal subnucleus caudalis (Vc) following experimental tooth movement. Material and Methods Male Sprague-Dawley rats were used in this study and divided into small-dose capsaicin+force group, large-dose capsaicin+force group, saline+force group, and no force group. Closed coil springs were used to mimic orthodontic forces in all groups except for the no force group, in which springs were inactivated. Capsaicin and saline were injected into periodontal tissues. Rats were euthanized at 0 h, 12 h, 1 d, 3 d, 5 d, and 7 d following experimental tooth movement. Then, TG and Vc were obtained for immunohistochemical staining and western blotting against CGRP. Results Immunohistochemical results indicated that CGRP positive neurons were located in the TG, and CGRP immunoreactive fibers were distributed in the Vc. Immunohistochemical semiquantitative analysis and western blotting analysis demonstrated that CGRP expression levels both in TG and Vc were elevated at 12 h, 1 d, 3 d, 5 d, and 7 d in the saline + force group. However, both small-dose and large-dose capsaicin could decrease CGRP expression in TG and Vc at 1 d and 3 d following experimental tooth movement, as compared with the saline + force group. Conclusions These results suggest that capsaicin could regulate CGRP expression in TG and Vc following experimental tooth movement in rats.

The effect of capsaicin on expression patterns of CGRP in trigeminal ganglion and trigeminal nucleus caudalis following experimental tooth movement in rats.

Objectives: The aim of this study was to explore the effect of capsaicin on expression patterns of calcitonin gene-related peptide (CGRP) in the trigeminal ganglion (TG) and trigeminal subnucleus caudalis (Vc) following experimental tooth movement. Material and Methods: Male Sprague-Dawley rats were used in this study and divided into small-dose capsaicin+force group, large-dose capsaicin+force group, saline+force group, and no force group. Closed coil springs were used to mimic orthodontic forces in all groups except for the no force group, in which springs were inactivated. Capsaicin and saline were injected into periodontal tissues. Rats were euthanized at 0 h, 12 h, 1 d, 3 d, 5 d, and 7 d following experimental tooth movement. Then, TG and Vc were obtained for immunohistochemical staining and western blotting against CGRP. Results: Immunohistochemical results indicated that CGRP positive neurons were located in the TG, and CGRP immunoreactive fibers were distributed in the Vc. Immunohistochemical semiquantitative analysis and western blotting analysis demonstrated that CGRP expression levels both in TG and Vc were elevated at 12 h, 1 d, 3 d, 5 d, and 7 d in the saline + force group. However, both small-dose and large-dose capsaicin could decrease CGRP expression in TG and Vc at 1 d and 3 d following experimental tooth movement, as compared with the saline + force group. Conclusions: These results suggest that capsaicin could regulate CGRP expression in TG and Vc following experimental tooth movement in rats.

The effectiveness of the Herbst appliance for patients with Class II malocclusion: a meta-analysis.

OBJECTIVE: To systematically investigate review in literature the effects of the Herbst appliance for patients with Class II malocclusion patients. METHOD: We performed a comprehensive literature survey on PubMed, Web of Science, Embase, CENTRAL, SIGLE, and ClinicalTrial.gov up to December 2014. The selection criteria: randomized controlled trials or clinical controlled trials; using any kind of Herbst appliances to correct Class II division 1 malocclusions; skeletal and/or dental changes evaluated through lateral cephalograms. And the exclusion criteria: syndromic patients; individual case reports and series of cases; surgical interventions. Article screening, data extraction, assessment of risk of bias, and evaluation of evidence quality through GRADE were conducted independently by two well-trained orthodontic doctors. Consensus was made via group discussion of all authors when there is inconsistent information from the two. After that, sensitivity analysis and subgroup analysis were performed to evaluate the robustness of the meta-analysis. RESULTS: Twelve clinical controlled trials meet the above-mentioned criteria, and were included in this analysis. All included studies have eleven measures taken during both active treatment effect and long term effect periods, including four angular ones (i.e., SNA, SNB, ANB, mandibular plane angle) and seven linear ones (i.e. Co-Go, Co-Gn, overjet, overbite, molar relationship, A point-OLp, Pg-OLp) during active treatment effect period were statistically pooled. Meta-analysis and sensitivity analysis demonstrated that all these measures showed consistent results except for SNA, ANB, and overbite. Subgroup analysis showed significant changes in SNA, overbite, and Pg-OLp. Publication bias was detected in SNB, mandibular plane angle, and A point-OLp. CONCLUSION: The Herbst appliance is effective for patients with Class II malocclusion in active treatment period. Especially, there are obvious changes on dental discrepancy and skeletal changes on Co-Gn. As to its long-term effects, more evidence is needed to draw conclusions.

The effectiveness of low-level laser therapy in accelerating orthodontic tooth movement: a meta-analysis.

Low-level laser therapy is claimed to accelerate bone remodeling. The aim of this meta-analysis was to critically appraise current evidence and to determine the effectiveness of low-level laser therapy in accelerating orthodontic tooth movement. PubMed, Web of Knowledge, Embase, CENTRAL, ProQuest Dissertations &Theses, and SIGLE were electronically searched from Jan 1990 to Jun 2013. Article screening, data extraction, assessment of risk of bias and evaluation of evidence quality through GRADE were conducted independently and in duplicate by two reviewer authors. Outcome of interest in this meta-analysis was accumulative moved distance (AMD). Meta-analyses were performed in Comprehensive Meta-Analysis Version 2.2.064 (Biostat, Englewood, NJ, USA). Finally, five studies were included in this meta-analysis. The meta-analysis revealed that the pooled difference in mean (DM) was 0.33 [95 % CI: (0.03-0.64)], 0.76 [95 % CI: (-0.14, 1.65)] and 0.43 [95 % CI: (-0.05, 0.91)] for AMD within 1 month, AMD within 2 months and AMD within 3 months, respectively. However, significant heterogeneities and instability of the pooled results were detected. Moreover, publication bias was found for AMD within 3 months. The subgroup analysis on the wavelength of 780 nm revealed that the pooled DM of AMD were 0.54 (95 % CI = 0.18-0.91), 1.11 (95 % CI = 0.91-1.31) and 1.25 (95 % CI = 0.68-1.82) for 1, 2, and 3 months, respectively. For the output power of 20 mW, the subgroup analysis showed that the pooled DM of AMD was 0.45 (95 % CI = 0.26-0.64), 1.11 (95 % CI = 0.91-1.31), and 1.25 (95 % CI = 0.68-1.82) for 1, 2, and 3 months, respectively. Weak evidence suggests that low-level laser irradiations at the wavelength of 780 nm, at the fluence of 5 J/cm(2) and/or the output power of 20 mW could accelerate orthodontic tooth movement within 2 months and 3 months. However, we cannot determine its effectiveness within 1 month due to potential measurement errors.

The Accuracy of Computer Image-Guided Template for Mandibular Angle Ostectomy.

BACKGROUND: Mandibular angle ostectomy (MAO) is commonly used to correct prominent mandibular angles through an intraoral approach. However, limited vision in the operative site may lead to difficulties or complications during surgery. Therefore, it is necessary to develop an effective method for helping surgeons to perform MAO more precisely and safely. METHODS: In this study, we report a novel method of a computer image-guided surgical template for navigation of MAO, and evaluate its accuracy and clinical outcomes. Nine patients with a prominent mandibular angle were enrolled in this study. A pair of stereolithographic templates was fabricated by computer-aided image design and 3D printing. In all cases, bilateral MAO was performed under the guide of these templates. Post-operative effects were evaluated by 3D curve functions and maximal shell-to-shell deviations. RESULTS: All patients were satisfied with their cosmetic outcomes. The mean and SD of ICC between R-Sim and R-Post were 0.958 ± 0.011; between L-Sim and L-Post, 0.965 ± 0.014; and between R-Post and L-Post, 0.964 ± 0.013. The maximal shell-to-shell deviations between the simulated mandibular contour and post-operative mandibular contour on the right and left sides were 2.02 ± 0.32 and 1.97 ± 0.41 mm, respectively. CONCLUSION: The results of this study suggest that this new technique could assist surgeons in making better pre-surgical plans and ensure more accurate and safer manipulation for completion of this procedure.

Integration accuracy of laser-scanned dental models into maxillofacial cone beam computed tomography images of different voxel sizes with different segmentation threshold settings.

OBJECTIVE: The aims were to examine the influence of cone beam computed tomography (CBCT)-scanned voxels and segmentation threshold settings on the accuracy of surface-based registration. STUDY DESIGN: The samples were obtained from 10 adults. Each laser-scanned model was registered into a CBCT model by use of the iterative closest point algorithm. We calculated the shell-to-shell deviations between the 2 models and evaluated the results with color-mapping methods. The centroid coordinates were used to calculate the positional differences. Thresholds were expressed in relative Hounsfield units (RHU). RESULTS: There was a statistically significant difference in shell-to-shell deviations between the 0.20-mm-voxel group and the 0.40-mm-voxel group (P < .001). There was a statistically significant difference in anteroposterior and superoinferior directions between the 200- and 700-RHU threshold models in 2 groups (P < .05). CONCLUSIONS: The results indicated that the accuracy of the integration of laser-scanned dental models into CBCT images is higher with a high-RHU threshold setting in 0.20- and 0.40-mm voxel sizes.